skip to main text

Wi-Fi Connection

Note

  • If (Alarm lamp) is lit or flashing, press the OK button.

  1. If the printer's ON lamp is on and the Network status icon is flashing, press the Wireless select button.

    figure: Network status icon flashes while connecting to network

  2. If the printer's ON lamp is flashing, press the Stop button.

    figure: The ON lamp flashes; press the Stop button

    If the ON lamp is still flashing after 10 seconds, press the Stop button again.

  3. Select Wi-Fi setup method.

Note

  • You will not be able to connect if the encryption method is not compatible with the wireless router you are connecting to.
  • WPS cannot connect to a Wi-Fi router that only supports WPA3.
  • In any of the above cases, press the Back button and connect using the Easy Wireless Connect on your PC/smartphone, or change the encryption settings on your wireless router.